ANISOTROPY OF MECHANICAL PROPERTIES OF FILLED VULCANIZATES SUBJECTED TO EXTERNAL LOADING

Authors

  • V.V. Shadrin Institute of Continuous Media Mechanics UB RAS; Perm State National Research University
  • K.A. Mokhireva Institute of Continuous Media Mechanics UB RAS; Perm State National Research University
  • L.A. Komar Institute of Continuous Media Mechanics UB RAS

DOI:

Keywords:

vulcanizate, carbon black, carbon nanofibers, cyclic stretching, orthogonal directions

Abstract

We have carried out a series of experiments on elastomeric materials with different types of reinforcing fillers (carbon black and mixture of carbon black and nanofibers) subjected to successive stretches first along one axis, and then along the second one. The tests were performed on a biaxial testing machine Zwick and a uniaxial testing machine Testometric FS100kN-CT. The use of a scanning probe microscope Dimension Icon allowed us to investigate the structure of the stretched material. It is shown that the structural rearrangement of elastomers filled with carbon black and carbon nanofibers proceeds differently during stretching.

Supporting Agencies
Работа выполнена при финансовой поддержке РФФИ и Правительства Пермского края (грант № 14-08-96013).

Author Biographies

  • V.V. Shadrin, Institute of Continuous Media Mechanics UB RAS; Perm State National Research University
    ведущий специалист (ИМСС УрО РАН), инженер (ПГНИУ)
  • K.A. Mokhireva, Institute of Continuous Media Mechanics UB RAS; Perm State National Research University
    младший научный сотрудник, ИМСС УрО РАН; инженер, ПГНИУ
  • L.A. Komar, Institute of Continuous Media Mechanics UB RAS
    кандидат физико-математических наук, старший научный сотрудник

References

  1. Dyer S.R.A., Lord D., Hutchinson I.J., Ward I.M., Duckett R.A. Elastic anisotropy in unidirectional fibre reinforced composites // J. of Physics D: Applied Physics. - 1992. - Vol. 25, No 1. P. 66-73.
  2. Darras O., Duckett R.A., Hine P.J., Ward I.M. Anisotropic elasticity of oriented polyethylene materials // Composites Science and Technology. - 1995. - Vol. 55, No. 2. - P. 131-138.
  3. Ward I.M. Mechanical anisotropy of highly oriented polymers // J. of Computer-Aided Materials Design. - 1997. - Vol. 4, No 1. - P. 43-52.
  4. Fu S.-Y., Lauke B. An analytical characterization of the anisotropy of the elastic modulus of misaligned short- fiber-reinforced polymers // Composites Science and Technology. - 1998. - Vol. 58, No 12. - P. 1961-1972.
  5. Fu S.-Y., Lauke B. Strength anisotropy of misaligned short-fibre-reinforced polymers // Composites Science and Technology. - 1999. - Vol. 59, No 5. - P. 699-708.
  6. Fu S., Li L. Strength and modulus anisotropy of short fiber reinforced polymer composites // Chinese Journal of Materials Research. - 2003. - Vol. 17, No 4. - P. 408-414.
  7. Lopez-Manchado M.A., Biagiotti J., Valentin L., Kenny J.M. Dynamic Mechanical and Raman Spectroscopy Studies on the Interaction between Single-Walled Carbon Nanotubes and Natural Rubber // J. of Applied Polymer Science. - 2004. - Vol. 92, No 5. - P. 3394-3400.
  8. Huang Z.-M., Zhang Y.-Z., Kotaki M., Ramakrishna S. A review on polymer nanofibers by electrospinning and their applications in nanocomposites // Composites Science and Technology. - 2003. - Vol. 63, No 15. - P. 2223-2253.
  9. Machado G., Chagnon G., Favier D. Induced anisotropy by the Mullins effect in filled silicone rubber // Mechanics of Materials. - 2012. - Vol. 50. - P. 70-80.
  10. Luo D., Wang W.-X., Takao Y. Effects of the distribution and geometry of carbon nanotubes on the macroscopic stiffness and microscopic stresses of nanocomposites // Composites Science and Technology. - 2007. - Vol. 67, No 14. - P. 2947-2958.
  11. Fu S.-Y., Hu X., Yue C.-Y. Effects of fiber length and orientation distributions on the mechanical properties of short-fiber-reinforced polymers - a review // Materials Science Research International. - 1999. - Vol. 5, No 2. - P. 74-83.
  12. Chin W.-K., Liu H.-T., Lee Y.-D. Effects of fiber length and orientation distribution on the elastic modulus of short fiber reinforced thermoplastics // Polymer Composites. - 1988. - Vol. 9, No 1. - P. 27-35.
  13. Fu S.-Y., Lauke B. Effects of fiber length and fiber orientation distributions on the tensile strength of short- fiber-reinforced polymers // Composites Science and Technology. - 1996. - Vol. 56, No 10. - P. 1179-1190.
  14. Slannikov V.N., Zaharov A.P. Obrazcy dla ispytanij pri dvuhosnom cikliceskom nagruzenii // Trudy Akademenergo. - 2013. - No 3. - S. 70-79.
  15. Helfenstain J., Hollenstein M., Mazza E. Investigation on the optimal specimen design for planar-biaxial materials testing of soft materials // Constitutive Models for Rubber VI. - Ed. G. Heinrich, M. Kaliske, A.Lion, S. Reese. - CRS Press, 2010. - P. 371-376.
  16. Mohireva K.A., Svistkov A.L., Sadrin V.V. Sposob izgotovlenia obrazcov i ispytanie ih na dvuhosnoe rastazenie: patent No 2552121, zaregistr. v Gos. reestre izobretenij RF 29.04.2015 g.
  17. Mohireva K.A., Svistkov A.L., Sadrin V.V. Opredelenie optimal’noj formy obrazcov dla eksperimentov na dvuhosnoe rastazenie // Vycisl. meh. splos. sred. - 2014. - T. 7, No 4. - S. 353-362.
  18. Mullins L., Tobin N.R. Stress softening in rubber vulcanizates. Part I. Use of a strain amplification factor to prescribe the elastic behavior of filler reinforced vulcanized rubber // J. Appl. Polym. Sci. - 1965. - Vol. 9. - P. 2993-3005.
  19. Harwood J.A.C., Mullins L., Payne A.R. Stress softening in natural rubber vulcanizates. Part II. Stress softening effects in pure gum and filler loaded rubbers // J. Appl. Polym. Sci. - 1965. - Vol. 9. - No 9. - P. 3011-3021.
  20. Vilgis T.A., Heinrich G., Kluppel M. Reinforcement of polymer nano-composites. Theory, Experiments and Applications. - New York: Cambridge University Press, 2009. - 222 p.
  21. Sadrin V.V., Kornev U.V., Gamlickij U.A. Izmenenie svojstv reziny v rezul’tate modifikacii poverhnosti castic uglerodnogo napolnitela // Mehanika kompozicionnyh materialov i konstrukcij. - 2009. - T. 17, No 3. - S. 401-410.
  22. Sadrin V.V. Vosstanovlenie mehaniceskih svojstv rezin v rezul’tate termostatirovania // Vysokomolek. soed. Ser. B. - 2005. - T. 47, No 7. - C. 1237-1240.
  23. Shariff M.H.B.M. Anisotropic stress-softening model for compressible solids // Zeitschrift fur angewandte mathematik und physik. - 2009. - Vol. 60. - P. 1112-1134.
  24. Shariff M.H.B.M. An anisotropic model of the Mullins effect // J. of Engineering Mathematics. - 2006. - Vol. 56, No 4. - P. 415-435.
  25. Zgaevskij V.E., Anovskij U.G. Zavisimost’ vazkouprugih svojstv kompozitov s vysokoelasticeskoj matricej i zestkimi casticami napolnitela ot molekularnyh i strukturnyh parametrov mezfaznogo sloa // Mehanika kompozicionnyh materialov i konstrukcij. - 1998. - T. 4, No 3. - S. 106-117.
  26. Komar L.A., Mohireva K.A. Teoreticeskoe i eksperimental’noe issledovanie anizotropii mehaniceskih svojstv usilennyh elastomernyh nanokompozitov // Mehanika kompozicionnyh materialov i konstrukcij. - 2014. - T. 20, No 2. - S. 283-291.
  27. Komar L.A., Sadrin V.V., Belaev A.U., Morozov I.A., Mohireva K.A. Kompleksnoe issledovanie struktury i mehaniceskih svojstv napolnennyh elastomerov // Vest. Permskogo un-ta. Ser. Matematika, mehanika, informatika. - 2014. - T. 25, No 2. - S. 32-37.

Downloads

Published

2017-09-04

Issue

No. 1 (2017)

Section

Research: theory and experiment

How to Cite

Shadrin, V. ., Mokhireva, K. ., & Komar, L. . (2017). ANISOTROPY OF MECHANICAL PROPERTIES OF FILLED VULCANIZATES SUBJECTED TO EXTERNAL LOADING. Perm Federal Research Centre Journal, 1, 93-98. https://journal.permsc.ru/index.php/pscj/article/view/PSCJ2017n1p15