A two-level model for describing the nonisothermal deformation of two-phase polycrystals
DOI:
https://doi.org/10.7242/1999-6691/2014.7.2.19Keywords:
crystal plasticity, duplex steels, softening of slip systems, dynamic recovery, recrystallizationAbstract
Over the last few decades, two-phase austenitic-ferrite (duplex) steels have found wide application in many industries. Duplex steels have unique properties compared to the individual phases of the polycrystalline material. The essential feature of high-temperature deformation of this class of materials is softening processes, which provide the high ductility of polycrystals. Because a ferrite phase has high stacking fault energy (SFE), there occurs dynamic recovery, and in an austenitic phase with low SFE the relaxation of elastic stresses is attained during recrystallization. The paper uses an urgent approach to the description of plastic deformation which enables us to consider in explicit way the physical mechanisms of inelastic deformation at the scale levels lower than the macroscopic level. The main deformation mechanism for this class of materials is the slipping of edge dislocations over the crystallographic planes and directions. The effect of temperature on the mobility of dislocations is examined. The basic physical mechanisms of crystal hardening due to the interaction of mobile dislocations with forest dislocations, barriers of the Lomer-Cottrell type and grain boundaries are taken into account. The softening mechanisms associated with recovery and recrystallization are described. The paper considers the modification of a physical two-level model describing the high-temperature deformation of duplex steels. A mathematical formulation for each level is presented. An algorithm for numerical implementation of the proposed model is given. Simulation results are in good qualitative agreement with experimental data.
Downloads
References
Hirt Dz., Lote I. Teoria dislokacij. - M.: Atomizdat, 1972. - 600 s.
2.Honikomb R. Plasticeskaa deformacia metallov. - M.: Mir, 1972. - 408 s.
3. Novikov I.I. Defekty kristalliceskogo stroenia metallov. - M.: Metallurgia, 1975. - 208 s.
4. Trusov P.V., Volegov P.S. Fiziceskie teorii plasticnosti: teoria i prilozenia k opisaniu neuprugogo deformirovania materialov. C. 1: Zestkoplasticeskie i uprugoplasticeskie modeli // Vestnik PNIPU. Mehanika. - 2011. - No 1. - S. 5-45.
5. Trusov P.V., Volegov P.S. Fiziceskie teorii plasticnosti: teoria i prilozenia k opisaniu neuprugogo deformirovania materialov. C. 2: Vazkoplasticeskie i uprugovazkoplasticeskie modeli // Vestnik PNIPU. Mehanika. - 2011. - No 2. - S. 101-131.
6. Trusov P.V., Volegov P.S. Fiziceskie teorii plasticnosti: teoria i prilozenia k opisaniu neuprugogo deformirovania materialov. C. 3: Teorii uprocnenia, gradientnye teorii// Vestnik PNIPU. Mehanika. - 2011. - No 3. - S. 146-197.
7. Bartali A.El., Evrard P., Aubin V., Herenu S., Alvarez-Armas I., Armas A.F., Degallaix-Moreuil S. Strain heterogeneities between phases in a duplex stainless steel. Comparison between measures and simulation // Procedia Engineering. - 2010. - Vol. 2, no. 1. - P. 2229-2237. DOI
8. Cabrera J.M., Mateo A., Llanes L., Prado J.M., Anglada M. Hot deformation of duplex stainless steels // J. Mater. Process. Tech. - 2003. - Vol. 143-144. - P. 321-325. DOI
9. Dakhlaoui R., Braham C., Baczmanski A. Mechanical properties of phases in austeno-ferritic duplex stainless steel - Surface stresses studied by X-ray diffraction // Mater. Sci. Eng. A-Struct. - 2007. - Vol. 444, no. 1-2. - P. 6-17. DOI
10. Faccoli M., Roberti R. Study of hot deformation behaviour of 2205 duplex stainless steel through hot tension tests // J. Mater. Sci. - 2013. - Vol. 48, no. 15. - P. 5196-5203. DOI
11. Farnousha H., Momenia A., Dehghania K., Mohandesia J.A., Keshmirib H. Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases // Mater. Design. - 2010. - Vol. 31, no. 1. - P. 220-226.
12. Evangelista E., Mengucci P., Bowles J., McQueen H.J. Grain and subgrain structures developed by hot working in as-cast 434 stainless steel // High Temp. Mater. Process. - 1993. -Vol. 12. - P. 57-66.
13. Cizek P., Wynne B.P. A mechanism of ferrite softening in a duplex stainless steel deformed in hot torsion // Mater. Sci. Eng. A-Struct. - 1997. - Vol. 230, no. 1-2. - P. 88-94. DOI
14. Iza-Mendia A., Pinol-Juez A., Urcola J.J., Gutierrez I. Microstructural and mechanical behavior of a duplex stainless steel under hot working conditions // Metall. Mater. Trans. A. - 1998. - Vol. 29, no. 12. - R. 2975-2986. DOI
15. Bokstejn S.Z. Stroenie i svojstva metalliceskih splavov. - M.: Metallurgia, 1971. - 496 s.
16. Trusov P.V., Asihmin V.N., Svejkin A.I. Dvuhurovnevaa model’ uprugoplasticeskogo deformirovania polikristalliceskih materialov // Mehanika kompozicionnyh materialov i konstrukcij. - 2009. - T. 15. No 3. - S. 327-344.
17. Trusov P.V., Svejkin A.I., Necaeva E.S., Volegov P.S. Mnogourovnevye modeli neuprugogo deformirovania materialov i ih primenenie dla opisania evolucii vnutrennej struktury // Fiz. mezomeh. - 2012. - T. 15, No 1. - S. 33-56.
18. Trusov P.V., Svejkin A.I. Teoria plasticnosti. - Perm’: Izd-vo PNIPU, 2011. - 419 s.
19. Trusov P.V., Volegov P.S. Opredelausie sootnosenia s vnutrennimi peremennymi i ih primenenie dla opisania uprocnenia v monokristallah // Fiz. mezomeh. - 2009. - T. 12, No 5. - S. 65-72.
20. Kondrat’ev N.S., Trusov P.V. Fiziceskaa model’ neuprugogo deformirovania dvuhfaznyh polikristallov // Vestnik Tambovskogo universiteta. - 2013. - T. 18, No 4 - S. 1873-1874.
21. Lubenec S.V. Dinamiceskij vozvrat i kinetika relaksacii naprazenij v kristallah pri nizkih i vysokih gomologiceskih temperaturah // FTT. -2002. - T. 44, No 1. - S. 72-77.
22. Kuhlmann D., Masing G., Raffelsieper J. Zur Theorie der Erholung // Zeitschrift fur Metallkunde. - 1949. - Vol. 40. - P. 241-246.
23. Fridel’ Z. Dislokacii. - M.: Mir. - 1967. - 644 s.
24. Trusov P.V., Volegov P.S., Anc A.U. Dvuhurovnevye modeli polikristallov: prilozenie k analizu sloznogo nagruzenia // Fiz. mezomeh. - 2013. - T. 16. No 6. - S. 43-50.
25. Kondrat’ev N.S., Trusov P.V. O mere razorientacii sistem skol’zenia sosednih kristallitov v polikristalliceskom agregate // Vestnik PNIPU. Mehanika. - 2012. - No 2. - S. 112-127.
26. Kondrat’ev N.S., Trusov P.V. Opisanie uprocnenia sistem dislokacionnogo skol’zenia za scet granic kristallitov v polikristalliceskom agregate // Vestnik PNIPU. Mehanika. - 2012. - No 3. - S. 78-97.
27. Kondrat’ev N.S., Trusov P.V. Modelirovanie neuprugogo deformirovania polikristalliceskih materialov s ucetom uprocnenia za scet granic kristallitov // Vestnik PGU. Seria: Fizika. - 2012. - No 4 (22). - S. 92-100.
28. Orlov A.N., Perevezencev V.N., Rybin V.V. Granicy zeren v metallah. - M.: Metallurgia. - 1980. - 156 s.
29. Kuksin A.U., Anilkin A.V. Atomisticeskoe modelirovanie dvizenia dislokacij v metallah v usloviah fononnogo trenia // FTT. - 2013. - T. 55, No 5. - S. 931-939.
30. Kocks U.F., Argon A.S., Ashby M.F. Thermodynamics and kinetics of slip / Progress in materials science. - Pergamon Press, 1975. - Vol. 19. - 291 p.
31. Necaeva E.S., Trusov P.V. Konstitutivnaa model’ casticno kristalliceskogo polimernogo materiala. Algoritm realizacii modeli mezourovna // Vycisl. meh. splos. sred. - 2011. - T. 4, No 1. - S. 74-89. DOI
32. Necaeva E.S., Trusov P.V. Konstitutivnaa model’ casticno kristalliceskogo polimernogo materiala. Algoritm realizacii dla predstavitel’nogo ob"ema makrourovna // Vycisl. meh. splos. sred. - 2011. - T. 4, No 2. - S. 82-95. DOI
33. Samarskij A.A., Gulin A.V. Cislennye metody matematiceskoj fiziki. - M.: Naucnyj mir, 2000. - 315 s.
34. Trusov P.V., Volegov P.S., Shveykin A.I. Constitutive elasto-viscoplastic model of FCC-crystals: Theory and application algorithms. - Saarbrucken: LAP LAMBERT Academic Publ., 2011. - 147 p.
35. Charles J., Vincent B. Duplex stainless steels for chemical tankers // Duplex Stainless Steels’97 Proceedings, 5th World conference, Maastricht, Netherlands, 21-23 October 1997. - Vol. 2. - P. 727-736.
36. Dobrzanski L.A., Brytan Z., Actis Grande M., Rosso M. Properties of duplex stainless steels made by powder, http://www.archivesmse.org/vol28_4/2844.pdf (data obrasenia: 03.06.2014).
37. Herrera C., Ponge D., Raabe D. Characterization of the microstructure, crystallographic texture and segregation of an as-cast duplex stainless steel slab // Steel Research International. - 2008. - Vol. 79, no. 6. - P. 482-488. DOI
Downloads
Published
Issue
Section
License
Copyright (c) 2014 Computational Continuum Mechanics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.