Numerical modeling of nonlinear processes of damage accumulation due to cyclic loading

Authors

  • Valentin Stepanovich Bondar Moscow State University of Mechanical Engineering (MAMI)
  • Vladimir Vasileivich Danshin Moscow State University of Mechanical Engineering (MAMI)
  • Pavel Vladimirovich Semenov Moscow State University of Mechanical Engineering (MAMI)

DOI:

https://doi.org/10.7242/1999-6691/2013.6.3.32

Keywords:

plasticity, damage accumulation, cyclic loading

Abstract

The paper considers the main principles and equations of the applied variant of the theory of elastoplastic processes and the kinetic equation of damage accumulation. The system of differential equations solvable with respect to the first derivatives, together with trivial initial conditions, is solved numerically by the fourth-order Runge-Kutta method. The nonlinear processes of damage accumulation are analyzed in stationary (regular, single-block) and non-stationary (non-scheduled, multi-block) cyclic loading under uniaxial hard loading conditions. A significant deviation from the linear damage summation rule is shown. The analysis is carried out to study low-cycle fatigue under complex cyclic loading along circular strain path. It is shown that such a trajectory has the most damaging effect. Calculated results are found to be in good agreement with experimental data.

Downloads

Download data is not yet available.

References

Pezina P. Modelirovanie zakriticeskogo povedenia i razrusenia dissipativnogo tverdogo tela // Trudy Amer. ob-va inz.-meh. Ser. D. Teoret. osnovy inz. rascetov. - 1984. - T. 106, No 4. - S. 107-117.
2. Savalle S., Caienatd G. Microanureage, micropropagation et endommagemant // La Resherche Aerospatiale. - 1982. - V. 6. - P. 395-411.
3. Margolin B.Z. Strukturno-mehaniceskoe modelirovanie razrusenia metalliceskih materialov i prognozirovanie dolgovecnosti elementov vysokonagruzennyh konstrukcij / Diss. ... dokt. tehn. nauk: 01.02.04. - Kiev, IPP im. G.S. Pisarenko NAN Ukrainy, 1992. - 384 s.
4. Volkov I.A., Korotkih U.G. Uravnenia sostoania vazkouprugoplasticeskih sred s povrezdeniami. - M.: Fizmatlit, 2008. - 424 s.
5. Bondar’ V.S. Neuprugost’. Varianty teorii. - M: Fizmatlit, 2004. - 144 s.
6. Novozilov V.V., Rybakina O.G. O perspektivah postroenia kriteria procnosti pri sloznom nagruzenii // Procnost’ pri malom cisle ciklov nagruzenia / Pod red. S.V. Serensena. - M.: Nauka, 1969. - S. 71-80.
7. Romanov A.N. Energeticeskie kriterii razrusenia pri malociklovom nagruzenii // Problemy procnosti. - 1974. - No 1. - S. 3-10.
8. Bondar’ V.S., Gorohov V.B., Sannikov V.M. Issledovania malociklovoj procnosti obolocek vrasenia pri sloznom teplosilovom nagruzenii // Prikladnye problemy procnosti i plasticnosti. - 1979. - No 12. - S. 120-126.
9. Bondar’ V.S., Sannikov V.M. Malociklovaa ustalost’ tonkostennyh konstrukcij pri povysennyh temperaturah // Konstrukcionnaa procnost’ lopatok turbin GTD: Tezisy dokladov IV naucno-tehn. konf., Kujbysev, 1976. - S. 75-76.
10. Il’usin A.A. Plasticnost’. Osnovy obsej matematiceskoj teorii plasticnosti. - M.: Izd-vo AN SSSR, 1963. - 271 s.
11. Il’usin A.A. Mehanika splosnoj sredy. - M.: Izd-vo MGU, 1990. - 310 s.
12. Novozilov A.A., Kadasevic U.I. Mikronaprazenia v konstrukcionnyh materialah. - L.: Masinostroenie, 1990. - 224 s.
13. Bondar’ V.S., Dansin V.V., Semenov P.V. Prikladnoj variant teorii uprugoplasticeskih processov // Izvestia TulGU. Estestvennye nauki. - 2011. - No 3. - S. 46-56.
14. Bondar’ V.S., Dansin V.S., Semenov P.V. Variant teorii uprugoplasticeskih processov i approksimacii funkcionalov plasticnosti // Problemy procnosti i plasticnosti. - 2011. - No 73. - S. 5-12.
15. Knets I.V. Osnovnye sovremennye napravlenia v matematiceskoj teorii plasticnosti. - Riga: Zinatne, 1971. - 147 s.
16. Bondar’ V.S. Neuprugoe povedenie i razrusenie materialov i konstrukcij pri sloznom neizotermiceskom nagruzenii / Dis. ... dokt. fiz.-mat. nauk: 01.02.04. - M., MAMI, 1990. - 314 s.
17. Bondar’ V.S., Dansin V.V. Plasticnost’. Proporcional’nye i neproporcional’nye nagruzenia. - M.: Fizmatlit, 2008. - 176 s.
18. Bernard-Konnoli, B’u Kuok, Biron. Ustalost’ korrozionnostojkoj stali 304 pri ispytaniah v usloviah mnogostupencatoj kontroliruemoj deformacii // Trudy Amer. ob-va inz.-meh. Ser. D. Teoret. osnovy inz. rascetov. - 1983. - No 3. - S. 47-53.
19. Sosi D. Modeli razrusenia pri mnogoosnoj ustalosti // Trudy Amer. ob-va inz.-meh. Ser. D. Teoret. osnovy inz. rascetov. - 1988. - No 3. - S. 9-21.

Published

2013-10-18

Issue

Section

Articles

How to Cite

Bondar, V. S., Danshin, V. V., & Semenov, P. V. (2013). Numerical modeling of nonlinear processes of damage accumulation due to cyclic loading. Computational Continuum Mechanics, 6(3), 286-291. https://doi.org/10.7242/1999-6691/2013.6.3.32