Plane stress state of media with plastic properties sensitive to the type of stress
DOI:
https://doi.org/10.7242/1999-6691/2009.2.2.12Keywords:
plane stress, tensile crack, stress type, plastic equilibriumAbstract
Plane stress problems are considered for the media whose plastic properties are sensitive to the type of stress. The properties of equations characterizing the distribution of stresses and velocities in plastic regions are studied. Some features of the solutions of the problems of the limit plastic equilibrium of media are considered. The problem of a plastic thin sheet with a linear cut subjected to tension far from the cut and normal to its plane is solved. The problem of tension of a strip with V-shape cuts is considered as well. The dependence of the limit load on the parameter characterizing the sensitivity of the plastic properties of media to the type of stress is studied.
Downloads
References
Lomakin E.V. Zavisimost’ predel’nogo sostoania kompozitnyh i polimernyh materialov ot vida naprazennogo sostoania // Meh. kompozit. materialov. - 1988. - No 1. - S. 3-9.
Lomakin E.V. Plasticeskoe tecenie dilatiruusej sredy v usloviah ploskoj deformacii // Izv. RAN. MTT. - 2000. - No 6. - S. 58-68.
Rabotnov U.N. Polzucest’ elementov konstrukcij. - M.: Nauka, 1966. - 752s.
Frejdental’ A., Gejringer H. Matematiceskie teorii neuprugoj splosnoj sredy. - M: Fizmatlit, 1962. - 432s.
Kacanov L.M. Osnovy teorii plasticnosti. - M.: Nauka, 1969. - 420s.
Hutchinson J.W. Plastic stress and strain fields at a crack tip // J. Mech. Phys. Solids. - 1968. - V. 16. - P. 337-347. DOI
Downloads
Published
Issue
Section
License
Copyright (c) 2009 Computational Continuum Mechanics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
