Development of methods for solving torsion problems of physically nonlinear solids
DOI:
https://doi.org/10.7242/1999-6691/2021.14.4.34Keywords:
stress state type, torsion, Runge-Kutta method, FEMAbstract
The mechanical properties of many materials, such as concrete, cast iron, rocks, some structural graphites, refractory ceramics, etc., which are usually porous materials with an inhomogeneous structure, depend on the type of stress state. This manifests itself in the absence of unified diagrams of the relationship between stress and strain intensity for various types of stress state. Such dependence is typical of the materials characterized by the growth of deformation in the nonlinear region of deformation. For these materials, the processes of volumetric and shear deformation are interrelated, which is expressed in the appearance of volumetric deformations during torsion. When the linear constitutive relations are used to analyze the torsion problems of such materials, a significant error occurs. The parameter characterizing the type of stress state can be, for example, the ratio of the average stress to the stress intensity. This paper considers the linear constitutive relations, which take into account the dependence of the mechanical properties of the material on the type of stress state. The results of numerical solution of the problem of torsion of a circular pipe by reducing it to a system of ordinary differential equations are presented. The system of differential equations is solved using the 4-order Runge-Kutta method with automatic step selection and error estimation. The features of the implementation of the method are discussed. In the second part of the article, the results of numerical modeling of torsion problems of a circular pipe are described using a finite element analysis software, for which a special library that implements the considered constitutive relations is written. The features of the finite element analysis which were taken into account when writing the library code are shown. The results of the calculations demonstrate the presence of axial deformation during torsion. The results obtained by different methods are compared.
Downloads
References
Leonov M.Ya., Panyayev V.A., Rusinko K.N. Zavisimost’ mezhdu deformatsiyami i napryazheniyami dlya polukhrupkikh tel [Relationship between deformations and stresses for semi-brittle bodies]. zhurnal. MTT – Mechanics of Solids, 1967, no. 6, pp. 26-32.
Stavrogin A.N., Protosenya A.G. Plastichnost’ gornykh porod [Plasticity of rocks]. Moscow, Nedra, 1979. 301 p.
Rudnicki J.W., Rice J.R. Conditions for the localization of deformation in pressure-sensitive dilatant materials. Mech. Phys. Solid., 1975, vol. 23, pp. 371-394. https://doi.org/10.1016/0022-5096(75)90001-0
Yagn Yu.N., Evstratov V.V. Prochnost’ i plastichnost’ modifitsirovannogo chuguna pri razlichnykh napryazhennykh sostoyaniyakh [Strength and ductility of modified cast iron under various stress states]. DAN SSSR – Soviet mathematics. Doklady, 1957, vol. 113, no. 3, pp. 573-575.
Fridman T.M., Anufriev Yu.P., Barabanov V.N. Study of the feacture of graphitic materials under complex stressed-state conditions. Strength Mater., 1973, vol. 5, pp. 52-55. https://doi.org/10.1007/BF00762872
Jaeger J.C., Cook N.G.W., Zimmerman R.W. Fundamentals of rock mechanics. Oxford: Blackwell, 2007. 475 p.
Pourhosseini O., Shabanimashcool M. Development of an elasto-plastic constitutive model for intact rocks. J. Rock Mech. Min. Sci., 2014, vol. 66, pp. 1-12. https://doi.org/10.1016/j.ijrmms.2013.11.010
Zhao X.G., Cai M. A mobilized dilation angle model for rocks. J. Rock Mech. Min. Sci., 2010, vol. 47, pp. 368-384. https://doi.org/10.1016/j.ijrmms.2009.12.007
Ren C., Yu J., Cai Y., Yao W., Lai Y., Li A novel constitutive model with plastic internal and damage variables for brittle rocks. Eng. Frac. Mech., 2021, vol. 248, 107731. https://doi.org/10.1016/j.engfracmech.2021.107731
Jin J., She C., Shang P. Evolution models of the strength parameters and shear dilation angle of rocks considering the plastic internal variable defined by a confining pressure function. Eng. Geol. Environ., 2021, vol. 80, pp. 2925-2953. https://doi.org/10.1007/s10064-020-02040-1
Zhang Q.S., Yang G.S., Ren J.X. New study of damage variable and constitutive equation of rock. Chinese Journal of Rock Mechanics and Engineering, 2003, vol. 22, pp. 30-34.
Xiao J.-Q., Ding D.-X., Jiang F.-L, Xu G. Fatigue damage variable and evolution of rock subjected to cyclic loading. J. Rock Mech. Min. Sci., 2010, vol. 47, pp. 461-468. https://doi.org/10.1016/j.ijrmms.2009.11.003
Vakili A. An improved unified constitutive model for rock material and guidelines for its application in numerical modelling. Computers and Geotechnics, 2016, vol. 80, pp. 261-282. https://doi.org/10.1016/j.compgeo.2016.08.020
Dhuha H. Ali. Prediction of stresses around tunnel in rock during advancing TBM. Diyala Journal of Engineering Sciences, 2020, vol. 13, pp. 101-113. https://doi.org/10.24237/djes.2020.13310
Liu Y., Lai H. Load characteristics of tunnel lining in flooded loess strata considering loess structure. Civil. Eng., 2019, vol. 2019, 3731965. https://doi.org/10.1155/2019/3731965
Lomakin E.V., Rabotnov Yu.N. Sootnosheniya teorii uprugosti dlya izotropnogo raznomodul’nogo tela [A theory of elasticity for isotropic body with different moduli in tension and compression]. AN SSSR. MTT – Mechanics of solids, 1978, vol. 13, no. 6, pp. 29-34.
Lomakin E.V. Torsion of cylindrical bodies with varying strain properties. Solids, 2008, vol. 43, pp. 502-511. https://doi.org/10.3103/S0025654408030217
Lomakin E.V. Torsion of rods with elastic properties depending on the stress state type. AN SSSR. MTT – Mechanics of solids, 2002, vol. 37, no. 4, pp. 23-30.
Lomakin E.V. Opredelyayushchiye sootnosheniya deformatsionnoy teorii dlya dilatiruyushchikh sred [Constitutive relations of deformation theory for dilatant media]. AN SSSR. MTT – Mechanics of solids, 1991, no. 6, pp. 66-75.
Adamov A.A. Methodological problems in experimental studies and verification of the governing equations of the theory of elasticity for an isotropic body with different moduli in tension and compression. Appl. Mech. Tech. Phy., 2020, vol. 61, pp. 979-985. https://doi.org/10.1134/S0021894420060115
Ambartsumyan S.A. Raznomodul’naya teoriya uprugosti [Multi-modulus theory of elasticity]. Moscow, Nauka, 1982. 320
Hussein A., Marzouk H. Behavior of high-strength concrete under biaxial stresses. Aci Structural Journal, 2000, vol. 97, pp. 27-36.
Kupfer H.B., Gerstle K.H. Behaviour of concrete under biaxial stresses. ASCE J. Eng. Mech. Div., 1973, vol. 99, pp. 853-866. https://doi.org/10.1061/JMCEA3.0001789
Novozhilov V.V. O fizicheskom smysle invarivntov ispol’zuyemykh v teorii plastichnosti [On the physical meaning of invariants used in the theory of plasticity]. PMM – Journal of Applied Mathematics and Mechanics, 1952, vol. 16, no. 5, pp. 615-619.
Bakhvalov N.S., Zhidkov N.P., Kobel’kov G.M. Chislennyye metody [Computational methods]. Moscow, Binom, 2008. 636 p.
Hairer E., Norsett S.P., Wanner G. Solving ordinary differential equations I. Nonstiff problems. Springer, 1993. 528 p.
Fedorenko R.P. Vvedeniye v vychislitel’nuyu fiziku [An introduction to computational physics]. Moscow, Izd-vo MFTI, 1994. 528 p.
ANSYS 13. Documentation. Theory Reference.URL: https://www.mm.bme.hu/~gyebro/files/ans_help_v182/ans_thry/ans_thry.html (accessed 7 December 202107.12.2021).
ANSYS Mechanical APDL Programmers Reference. URL: https://dokumen.tips/documents/ansys-mechanical-apdl-programmers-reference.html (дата обращения 07.12.2021
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Computational Continuum Mechanics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
