Study of localized shear failure of AMg6 alloy specimens under static and dynamic loading

Authors

  • Mikhail Al’bertovich Sokovikov Institute of Continuous Media Mechanics UB RAS
  • Mikhail Yur’yevich Simonov Institute of Continuous Media Mechanics UB RAS; Perm National Research Polytechnic University
  • Vladimir Aleksandrovich Oborin Institute of Continuous Media Mechanics UB RAS
  • Vasiliy Valer’yevich Chudinov Institute of Continuous Media Mechanics UB RAS
  • Sergey Vital’yevich Uvarov Institute of Continuous Media Mechanics UB RAS
  • Oleg Borisovich Naimark Institute of Continuous Media Mechanics UB RAS

DOI:

https://doi.org/10.7242/1999-6691/2021.14.3.25

Keywords:

plastic shear localization, dynamic loading, numerical simulation, evolution of the defect structure, study of the surface relief of the deformed samples, structural studies

Abstract

Experiments on dynamic loading of specimens made of AMg6 alloy were conducted on the Hopkinson-Kolsky bar apparatus, while the static loading tests were carried out on the Testometric electromechanical testing machine. Temperature fields generated in the processes of dynamic deformation were investigated "in-situ" by recording temperatures with a high-speed infrared camera CEDIP Silver 450M. The temperature measured in the zone of strain localization formed in the material during dynamic loading does not confirm the traditional view of the strain localization mechanism as the one associated with thermoplastic instability. Static and dynamic tests were carried out for AMg6 alloy specimens specifically designed to study plastic strain localization using for this purpose the Testometric electromechanical testing machine and split Gopkinson-Kolsky bar, as well as the StrainMaster system for noninvasive measurement of shape and strains. Displacement and strain fields generated in specially shaped AMg6 alloy specimens under static deformation and dynamic loading were constructed. Comparison of the temperature fields experimentally obtained under dynamic loading and strain fields under static and dynamic loading with the results of numerical modeling made with account of kinetics of mesodefect accumulation in the material shows good agreement to the accuracy of ~20%. After the experiments, the surface relief of specially shaped stressed specimens was examined using an optical interferometer-profile meter New View-5010. The processing of the obtained 3D strain relief data made it possible to evaluate the scale invariant (Hurst index) and spatial scale of the area where the correlated behavior of mesodefects was observed. The data of experimental studies, the examination of the surface topography of deformed specimens, structural studies, as well as the data of numerical simulation conducted with consideration of the kinetics of mesodefect accumulation in the material suggest that one of the mechanisms of plastic strain localization in the alloy AMg6 at the examined rates of loading is associated with discontinuous processes in the defect structure of materials. However, the character of specimen failure under static and dynamic loading is due to realization of different scenarios for the behavior of defective subsystems.

Downloads

Download data is not yet available.
Supporting Agencies
Исследование выполнено при поддержке Российского научного фонда (грант №21-79-30041).

References

Giovanola H. Adiabatic shear banding under pure shear loading. Part I: direct observation of strain localization and energy dissipation measurements. Mater., 1988, vol. 7, pp. 59-71. https://doi.org/10.1016/0167-6636(88)90006-3">https://doi.org/10.1016/0167-6636(88)90006-3

Burns T.J. Does a shear band result from a thermal explosion? Mater., 1994, vol. 17, pp. 261-271. https://doi.org/10.1016/0167-6636(94)90064-7">https://doi.org/10.1016/0167-6636(94)90064-7

Nemat-Nasser S., Li Y.F., Isaacs J.B. Experimental/computational evolution of flow stress at high strain rates with application to adiabatic shear banding. Mater., 1994, vol. 17, pp. 111-134. https://doi.org/10.1016/0167-6636(94)90053-1">https://doi.org/10.1016/0167-6636(94)90053-1

Bai Y., Xuc Q., Xu Y., Shen L. Characteristics and microstructure in the evolution of shear localization in Ti-6Al-4V alloy. Mater., 1994, vol. 17, pp. 155-164. https://doi.org/10.1016/0167-6636(94)90056-6">https://doi.org/10.1016/0167-6636(94)90056-6

Grady D.E. Dynamic of adiabatic shear. Phys. IV France, 1991, vol. 1, pp. C3-653-C3-660.

Belytschko T., Krongauz Y., Organ D., Fleming M., Krysl P. Meshless methods: An overview and recent developments. Meth. Appl. Mech. Eng., 1996, vol. 139, pp. 3-47. https://doi.org/10.1016/S0045-7825(96)01078-X">https://doi.org/10.1016/S0045-7825(96)01078-X

Wright T.W., Ravichandran G. Canonical aspects of adiabatic shear bands. J. Plast., 1997, vol. 1, pp. 309-325. https://doi.org/10.1016/S0749-6419(97)80002-2">https://doi.org/10.1016/S0749-6419(97)80002-2

Medyanik S.N., Liu W.K., Li S. On criteria for dynamic adiabatic shear band propagation. Mech. Phys. Solid., 2007, vol. 55, pp. 1439-1461. https://doi.org/10.1016/j.jmps.2006.12.006">https://doi.org/10.1016/j.jmps.2006.12.006

Rittel D., Ravichandran G., Venkert A. The mechanical response of pure iron at high strain rates under dominant shear. Sci. Eng., 2006, vol. 432, pp. 191-201. https://doi.org/10.1016/j.msea.2006.05.154">https://doi.org/10.1016/j.msea.2006.05.154

Rittel D., Wang Z.G., Merzer M. Adiabatic shear failure and dynamic stored energy of cold work. Rev. Lett., 2006, vol. 96, 075502. https://doi.org/10.1103/PhysRevLett.96.075502">https://doi.org/10.1103/PhysRevLett.96.075502

Rittel D., Landau P., Venkert A. Dynamic recrystallization as a potential cause for adiabatic shear failure. Rev. Lett., 2008, vol. 101, 165501. https://doi.org/10.1103/PhysRevLett.101.165501">https://doi.org/10.1103/PhysRevLett.101.165501

Marchand А., Duffy J. An experimental study of the formation process of adiabatic shear bands in a structural steel. Mech. Phys. Solid., 1988, vol. 36, pp. 251-283. https://doi.org/10.1016/0022-5096(88)90012-9">https://doi.org/10.1016/0022-5096(88)90012-9

Naimark O.B. Collective propertiesof defects ensembles andsomenonlinearproblemsof plasticityand fracture. mesomech., 2003, vol. 6, no. 4, pp. 39-63.

Naimark O.B., Bayandin Yu.V., Sokovikov M.A., Plekhov O.A., Uvarov S.V., Bannikov M.V., Chudinov V.V. Specimen for shear test (variants) and test method for it. RF Patent No. 2011,114,711/28, Byull. Izobret., 20 May 2013.

Bilalov D.A., Sokovikov M.A., Chudinov V.V., Oborin V.A., Bayandin Yu.V., Terekhina A.I., Naimark B. Numerical simulation and experimental study of plastic strain localization under the dynamic loading of specimens in conditions close to a pure shear. J. Appl. Mech. Tech. Phy., 2018, vol. 59, pp. 1179-1188. https://doi.org/10.1134/S0021894418070027">https://doi.org/10.1134/S0021894418070027

Bilalov D.A., Sokovikov M.A., Chudinov V.V. Multiscale mechanisms of plastic strain localization in the process of target perforation. Deformatsiya i razrusheniye materialov, 2017, no. 5, pp. 43-47.

Bouchaud E. Scaling properties of cracks. Phys.: Condens. Matter., 1997, vol. 9, pp. 4319-4344. https://doi.org/10.1088/0953-8984/9/21/002">https://doi.org/10.1088/0953-8984/9/21/002

Downloads

Published

2021-09-30

Issue

Vol. 14 No. 3 (2021)

Section

Articles

License

Copyright (c) 2021 Computational Continuum Mechanics

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite

Sokovikov, M. A., Simonov, M. Y., Oborin, V. A., Chudinov, V. V., Uvarov, S. V., & Naimark, O. B. (2021). Study of localized shear failure of AMg6 alloy specimens under static and dynamic loading. Computational Continuum Mechanics, 14(3), 300-311. https://doi.org/10.7242/1999-6691/2021.14.3.25