Modeling of elastoplastic deformation of steel 45 along Archimedes spiral type trajectories
DOI:
https://doi.org/10.7242/1999-6691/2021.14.1.9Keywords:
plasticity, complex loading, Ilyushin's theory of elastoplastic processes, mathematical model, strain trajectory, Archimedes spiral, vector and scalar material propertiesAbstract
This paper addresses the mathematical modeling of complex elastoplastic deformation of steel 45 along the plane trajectory in the Ilyushin’s deviatoric space, which consists of sections of both constant and variable curvature (Archimedes spiral). The constitutive equations of the proposed mathematical model are based on the Ilyushin’s vector representation of strain and stress. An approximate model of the theory of elastoplastic processes is used in mathematical modeling for plane trajectories with approximations of process functionals, which depend on the initial value of the curvature, rather than on the current curvature of the deformation trajectory. The constitutive equations of the mathematical model are reduced to the Cauchy problem, a numerical solution to which is obtained using the fourth order Runge-Kutta method. The validity of the mathematical model for this class of curvilinear strain trajectories was verified by comparing the calculation results with the experimental data obtained on the automated test machine SN-EVM in the mechanical testing laboratory of the Tver State Technical University. The experiment was carried out on thin-walled cylindrical specimens of steel 45 under complex loading (combined tension-compression and torsion). The calculation results and experimental data characterizing the scalar and vector properties of the material are presented graphically. It has been established that the proposed approximate mathematical model is able to capture (both qualitatively and quantitatively) the main effects of complex plastic deformation for the considered class of strain trajectories in the areas of small and medium curvature. More accurate calculation results in the approximations of the plasticity functionals can be obtained by taking into account all complex loading parameters, including the current curvature of the strain trajectory, especially for strain trajectories with large curvature.
Downloads
References
Il’yushin A.A. Plastichnost’. Osnovy obshchey matematicheskoy teorii [Plasticity. Bases of the general mathematical theory] Moscow, Izd-vo AN SSSR, 1963. 271 p.
Il’yushin A.A. Mekhanika sploshnoy sredy [Continuum mechanics]. Moscow, Izd-vo MGU, 1990. 310 p.
Zubchaninov V.G. Mekhanika protsessov plasticheskikh sred [Mechanics of processes in plastic environments]. Moscow, Fizmatlit, 2010. 352 p.
Zubchaninov V.G. Ustoychivost’ i plastichnost’. T.2. Plastichnost’ [Stability and plasticity. Vol. 2. Plasticity]. Moscow, Fizmatlit. 2008. 336 p.
Zubchaninov V.G. The general mathematical theory of plasticity and the Il’yushin postulates of macroscopic definability and isotropy. Moscow Univ. Mech. Bull., 2018, vol. 73, pp 101-116. https://doi.org/10.3103/S0027133018050011">https://doi.org/10.3103/S0027133018050011
Zubchaninov V.G., Okhlopkov N.L., Garanikov V.V. Eksperimental’naya plastichnost’. Protsessy slozhnogo deformirovaniya [Experimental plasticity. Complex deformation processes]. Tver: TGTU, 2003. 184 p.
Degtyarev V.P. Plastichnost’ i polzuchest’ mashinostroitel’nykh konstruktsiy [Plasticity and creep of engineering constructions]. Moscow, Mashinostroyeniye, 1967. 131 p.
Vasin R.A. Opredelyayushchiye sootnosheniya teorii plastichnosti [Constitutive relations of the theory of plasticity] // Itogi nauki i tekhniki. VINITI. Ser. Mekhanika deformiruyemogo tverdogo tela [Results of Science and Technology. VINITI. Ser. Deformable Solid Mechanics]. Vol. 21. Moscow, 1990. Pp. 3-75.
Peleshko V.A. Applied and engineering versions of the theory of elastoplastic processes of active complex loading. Part 2: Identification and verification. Mech. Solids, 2016, vol. 51, pp. 91-113. https://doi.org/10.3103/S0025654416010106">https://doi.org/10.3103/S0025654416010106
Volkov I.A., Igumnov L.A., Tarasov I.S., Shishulin D.N., Markova M.T. Modeling complex plastic deformation of polycrystalline structural alloys along plane and spatial trajectories of arbitrary curvature. PPP – Problems of Strength and Plasticity, 2018, vol. 80, no. 2, pp. 194-208. https://doi.org/%2010.32326/1814-9146-2018-80-2-194-208">https://doi.org/ 10.32326/1814-9146-2018-80-2-194-208
Mitenkov F.M., Volkov I.A., Igumnov L.A., Korotkikh Yu.G., Panov V.A. Prikladnaya teoriya plastichnosti [Applied theory of plasticity]. Moscow, Fizmatlit, 2015. 282 p.
Annin B.D., Zhigalkin V.M. Povedeniye materialov v usloviyakh slozhnogo nagruzheniya [Material behavior under conditions of complex loading]. Novosibirsk, Izd-vo SO RAN, 1999. 342 p.
Bondar V.S. Inelasticity. Variants of the theory. Begell House, 2013. 174 p.
Zubchaninov V.G., Alekseyev A.A., Gultyayev V.I. 45 steel test under elastoplastic deformation on complex trajectories of fixed and variable curvatures. Deformatsiya i razrusheniye materialov, 2016, no. 9, pp. 14-19.
Zubchaninov V.G., Alekseev A.A., Gultiaev V.I., Alekseeva E.G. The processes of complex loading structural steel for a five-link piecewise broken strain path. Vestn. Tom. gos. un-ta. Matematika i mekhanika – Tomsk State University Journal of Mathematics and Mechanics, 2019, vol. 61, pp. 32-44. https://doi.org/10.17223/19988621/61/4">https://doi.org/10.17223/19988621/61/4
Zubchaninov V.G., Alekseev A.A., Gultiaev V.I. Modeling of elastic-plastic deformation of work material along multielement piecewise zig-zag linear trajectories. Vestnik PNIPU. Mekhanika – PNRPU Mechanics Bulletin, 2017, no. 3, pp. 203-215. https://doi.org/10.15593/perm.mech/2017.3.12">https://doi.org/10.15593/perm.mech/2017.3.12
Zubchaninov V.G., Alekseev A.A., Gultiaev V.I., Alekseeva E.G. Modeling of elastoplastic deformation of structural steel by a trajectory containing three circles touching internally. Materials Physics and Mechanics, 2019, vol. 42, pp. 528-534. https://doi.org/10.18720/MPM.4252019_6">https://doi.org/10.18720/MPM.4252019_6
Zubchaninov V.G., Alekseev A.A., Alekseeva E.G., Gultiaev V.I. Experimental verification of postulate of isotropy and mathematical modeling of elastoplastic deformation processes following the complex angled nonanalytic trajectories. Materials Physics and Mechanics, 2017, vol. 32, pp. 298-304. https://doi.org/10.18720/MPM.3232017_10">https://doi.org/10.18720/MPM.3232017_10
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Computational Continuum Mechanics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.