Modeling and frequency analysis of prestressed functionally graded plates with holes

Authors

  • Rostislav Dmitriyevich Nedin Southern Federal University

DOI:

https://doi.org/10.7242/1999-6691/2019.12.2.17

Keywords:

prestressed elastic body, Timoshenko plates, functionally graded materials, perforated plates, frequency analysis

Abstract

Materials with complex inhomogeneous structure, including functionally graded composites, are widely used in military and civil engineering, and in modern construction. Due to the peculiarities of the technological process of manufacturing such materials, in many of them a non-uniform initial stress-strain state develops. At the same time, in the production, prestress fields are often embedded in structures to improve their strength characteristics. This paper presents a general linearized formulation of the problem on oscillations of a prestressed elastic body. Using it as a basis, we have formulated the problem on steady-state mixed vibrations of a functionally graded perforated plate in a prestressed state within the framework of Timoshenko deformation hypotheses. A numerical solution to the direct problem was constructed using the finite element method; the effect of the inhomogeneous prestressed state of the plate on its amplitude-frequency characteristics and resonant frequencies was investigated. The results of computational experiments for the functionally graded laws for material modules simulating the W-Cu alloy are given. In the zones of circular plate holes, we used the local condensation of the finite element mesh to increase the accuracy of calculations. The proposed model allows to set an arbitrary type of initial state in the plate, both in the form of analytical dependencies and numerically. We present an example of a numerical experiment, when stress fields were formed in a plate as a result of applying some initial mechanical static load to a part of its boundary. In order to describe such a stress field, the corresponding static problem for the plate under consideration was additionally solved. The possibilities of identifying the parameters of a plane prestressed state based on the acoustic measurement data on the frequency characteristics of the plate are investigated

Downloads

Download data is not yet available.
Supporting Agencies
Исследование выполнено при финансовой поддержке Российского научного фонда (грант 18-71-10045).

References

Leonenko D.V. Vibrations of circular three-layer plates on en Pasternak elastic foundation. Ekologicheskiy vestnik nauchnykh tsentrov ChES – Ecological Bulletin of Research Centers of the Black Sea Economic Cooperation, 2014, no. 1, pp. 59-63.

Yang C., Jin G., Ye X., Liu Z. A modified Fourier–Ritz solution for vibration and damping analysis of sandwich plates with viscoelastic and functionally graded materials. Int. J. Mech. Sci., 2016, vol. 106, pp. 1-18. https://doi.org/10.1016/j.ijmecsci.2015.11.031">DOI

Hu Y., Li Z., Yu X., Yao Z. Effect of elastic prestress on the laser peen forming of aluminum alloy 2024-T351: Experiments and eigenstrain-based modeling. J. Mater. Process. Tech., 2015, vol. 221, pp. 214-224. https://doi.org/10.1016/j.jmatprotec.2015.02.030">DOI

Korsunsky A.M. Residual elastic strain due to laser shock peening: Modelling by eigenstrain distribution. J. Strain Anal. Eng., 2006, vol. 41, no. 3, pp. 195-204. https://doi.org/10.1243%2F03093247JSA141">DOI

Bagge N., Nilimaa J., Elfgren L. In-situ methods to determine residual prestress forces in concrete bridges. Eng. Struct., 2017, vol. 135, pp. 41-52. https://doi.org/10.1016/j.engstruct.2016.12.059">DOI

Lu Z.R., Law S.S. Identification of prestress force from measured structural responses. Mech. Syst. Signal Process., 2006, vol. 20, pp. 2186-2199. https://doi.org/10.1016/j.ymssp.2005.09.001">DOI

Wang C., Wang J., Wang R., Zhang R. A locking-free weak Galerkin finite element method for elasticity problems in the primal formulation. J. Comput. Appl. Math., 2016, vol. 307, pp. 346-366. https://doi.org/10.1016/j.cam.2015.12.015">DOI

Vatulyan A.O., Nedin R.D. On the reconstruction of inhomogeneous residual stress. Vestnik SPbGU. Matematika. Mekhanika. Astronomiya – Vestnik St. Petersburg University. Mathematics, 2011, no. 1. pp. 38-44.

Nedin R.D., Vatulyan A.O. Inverse problem of non-homogeneous residual stress identification in thin plates. Int. J. Solid. Struct., 2013, vol. 50, pp. 2107-2114. https://doi.org/10.1016/j.ijsolstr.2013.03.008">DOI

Nedin R.D., Vatulyan A.O. Concerning one approach to the reconstruction of heterogeneous residual stress in plate. ZAMM, 2014, vol. 94, pp. 142-149. https://doi.org/10.1002/zamm.201200195">DOI

Dudarev V.V., Nedin R.D., Vatulyan A.O. Nondestructive identification of inhomogeneous residual stress state in deformable bodies on the basis of the acoustic sounding method. Adv. Mater. Res., 2014, vol. 996, pp. 409-414. https://doi.org/10.4028/www.scientific.net/AMR.996.409">DOI

Vatul’yan A.O., Dudarev V.V., Nedin R.D. Predvaritel’nyye napryazheniya: modelirovaniye i identifikatsiya [Prestress: modeling and identification]. Rostov-na-Donu: Izd-vo YuFU, 2014. 206 p.

Nedin R., Dudarev V., Vatulyan A. Some aspects of modeling and identification of inhomogeneous residual stress. Eng. Struct., 2017, vol. 151, pp. 391-405. https://doi.org/10.1016/j.engstruct.2017.08.007">DOI

Nedin R.D., Vatulyan A.O., Bogachev I.V. Direct and inverse problems for prestressed functionally graded plates in the framework of the Timoshenko model. Math. Meth. Appl. Sci., 2018, vol. 41, pp. 1600-1618. https://doi.org/10.1002/mma.4688">DOI

Weaver W., Timoshenko S.P., Young D.H. Vibration problems in engineering (Fifth edition). John Wiley & Sons, 1990. 624 p.

Guz’ A.N., Makhort F.G., Gushcha O.I. Vvedeniye v akustouprugost’ [Introduction to acoustoelasticity]. Kiyev: Naukova dumka, 1977. 151 p.

Zhamakochyan K.A., Sargsyan S.H. Finite element method for calculation of bending of micropolar elastic thin plates. Vychisl. mekh. splosh. sred – Computational Continuum Mechanics, 2016, vol. 9, no. 3, pp. 375-383. https://doi.org/10.7242/1999-6691/2016.9.3.31">DOI

Kuznetsova Yu.S., Trufanov N.A. FEM implementation of a stress-based geometrical immersion method by example of the solution of plane elastic problems. Vychisl. mekh. splosh. sred – Computational Continuum Mechanics, 2014, vol. 7, no. 4, pp. 460-470. https://doi.org/10.7242/1999-6691/2014.7.4.44">DOI

Published

2019-06-30

Issue

Section

Articles

How to Cite

Nedin, R. D. (2019). Modeling and frequency analysis of prestressed functionally graded plates with holes. Computational Continuum Mechanics, 12(2), 192-201. https://doi.org/10.7242/1999-6691/2019.12.2.17